Samsung Digimax 250 - Manual (Page 42)

42
White balance : The white balance control allows you to adjust the colours to appear more
natural looking. The White Balance is available in STILL IMAGE, PHOTO
FRAME, MOVIE CLIP and MySET mode.
: The camera automatically selects the appropriate white balance
settings, depending on the prevailing lighting conditions.
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For taking images at sunset.
: For shooting under fluorescent lighting.
: For shooting under tungsten (standard light bulb) lighting.
: Allows the user to set the white balance according to the shooting
condition.
- AUTO
- DAYLIGHT
- CLOUDY
- SUNSET
- FLUORESCENT
- TUNGSTEN
- CUSTOM
White balance
Different lighting conditions may cause a colour cast on your images.
White balance
Using the Custom White Balance
The White Balance settings may vary slightly depending on the shooting environment. You
can select the most appropriate white balance setting for a given shooting environment by
setting up the custom white balance.
White Paper
[STILL IMAGE mode] [MOVIE CLIP mode]
WHITE BALANCE
AUTO
DAYLIGHT
CLOUDY
SUNSET
NOR
AWB
WHITE BALANCE
AUTO
DAYLIGHT
CLOUDY
SUNSET
NOR 30FPS
AWB
1. Select the CUSTOM menu of the White Balance.
2. Place a sheet of white paper in front of the camera
so that the LCD monitor shows only white, and then
press the SHUTTER button.
3. The custom white balance value will be saved and
the menu will disappear.
- The custom white balance value will be applied,
starting with the next picture you take.