Samsung Digimax 250 - Manual (Page 35)

35
Using the LCD monitor to adjust the camera settings
You can use the menu on the LCD monitor to set up recording functions.
The following functions are available, depending on the mode you have selected.
The items indicated by are default settings.
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
(when the camera status lamp next to the viewfinder illuminates)
- When there is no battery capacity.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
INFORMATION
Menu tab Main menu Sub menu Camera working mode
1600X1200
1024X768
800X600
640X480
S.FINE
FINE
NORMAL
HIGH
LOW
MULTI
SPOT
SINGLE
CONTINUOUS
AEB
SOFT
NORMAL
VIVID
SIZE
QUALITY
METERING
SHOOTING
SHARP