Setting up the application software – Samsung Digimax 250 User Manual
Page 85
85
Setting up the application software
29. After restarting the computer, connect the PC to the camera with the USB cable.
30. Turn the camera power on. [Found New Hardware
Wizard] will open and the computer will recognize the
camera.
If you have ever installed an image viewer program or
your OS is Windows XP, an image viewer program will
open.
If the image viewer program opens, the camera driver
was setup successfully.
31. If you can see [Removable Disk] under [My computer],
the camera driver installation was successful.
Now you can transfer image files from the camera to PC
via the USB cable.
28. To apply the changes, you have made, you must restart
the computer. Select [Yes, I want to restart my computer
now], and then click [OK].
[Click!]
* Depends on the system, following screen may display in the
step 27. Click the [Finish] button to restart the system
[Click!]