Samsung Digimax 250 - Manual (Page 29)

29
Focus lock
To focus on the subject positioned outside of the center, use the focus lock function.
Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. The Autofocus frame(green) will light up, indicating
that the camera is in focus. Be careful not to press the SHUTTER button all the way down
to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be canceled.
[ The image to be captured ] [ Press the SHUTTER button
halfway and focus on the subject ]
[ Recompose the picture and fully
depress the SHUTTER button ]
FLASH( ) / LEFT button
WIDE TELE WIDE TELE
0.8~3.0 0.8~2.5 0.15~0.8 0.6~0.8
(Unit : m)
[ Selecting the Auto flash ]
Flash range
When the menu is displayed on the LCD monitor, pressing
the LEFT button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH ( ) button.
Selecting the flash mode
1. Rotate the mode dial to select the STILL IMAGE mode.
2. Press the Flash( ) button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD
monitor.
Use the correct flash to suit the environment.
ISO
AUTO
MACRO AUTO FOCUS