Samsung Digimax 250 - Manual (Page 26)

26
WIDE / TELE button
This camera has a 2X optical zoom and a 2X digital zoom function. Using both will offer a
total zoom ratio of 4X. When you press the zoom (W/T) button, the zoom bar will display in
the upper center part of the LCD monitor.
TELE Zoom
Optical zoom TELE : Pressing the zoom button T. This will zoom into the subject i.e.
the subject will appear nearer.
Digital zoom TELE : When the maximum (2X) optical zoom is selected, pressing the
zoom button T activates the digital zoom software. Releasing
zoom button T stops the digital zooming at the required setting.
Once the maximum digital zoom (2X) is achieved, pressing the
zoom button T will have no effect. You can check the digital zoom
rate with the [X1.1 ~ X 2.0] numerical mark next to the zoom bar.
[ WIDE zoom ] [ TELE zoom ] [ Digital zoom 2.0X ]
Pressing the
TELE button Pressing the
TELE button
WIDE Zoom
Optical zoom WIDE : Pressing the zoom button W. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the W button
continuously will set the camera to its minimum zoom setting i.e.
the subject appears at its furthest from the camera.
Digital zoom WIDE : When the digital zoom is in operation, pressing the zoom button
W will reduce the digital zooming in steps. Releasing zoom button
W stops digital zooming. Pressing the W button will reduce the
digital zoom and then it will continue to reduce the optical zoom
until the minimum setting is reached.
[ TELE zoom ] [ Optical zoom 1.5X ] [ WIDE zoom ]
Pressing the
WIDE button
Pressing the
WIDE button
[ Digital zoom 2.0X ] [ Digital zoom 1.5X ] [ TELE zoom ]
Pressing the
WIDE button
Pressing the
WIDE button
Optical zoom
Digital zoom