Samsung Digimax 250 - Manual (Page 27)

27
WIDE / TELE button
To use the digital zoom the LCD monitor has to be turned on.
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
Digital Zoom will not work in Night Scene mode.
You may notice a decrease in image quality when using the digital zoom.
When the maximum(2X) optical zoom is selected, pressing the zoom button T increases
the digital zoom ratio by 0.1 steps.
If the movie clip is being recorded, the zoom operation cannot be activated.
Take care not to touch the lens to avoid taking an unclear image and possibly causing
camera malfunction.
If the image is dim, turn the camera power off and on again to modify the lens position.
Take care not to press the lens as this may cause a camera malfunction.
When the camera is turned on, take care not to touch the camera s moving lens parts as
this may cause the resulting image to be dim and unclear.
Take care not to touch the lens during zoom operation as this may cause damage.
INFORMATION
Voice memo( )/ UP button
While the menu is showing, press the UP button to move up the submenu cursor.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo( ) button. You can add your voice-over to a stored still image.
Recording a voice memo
1. Select STILL IMAGE mode by rotating the mode dial.
2. Press the VOICE MEMO( ) button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
[ Recording Voice Memo ] [ Preparing for Voice Memo ]