Silex technology WLAN MODULE SX-550 - Manual (Page 14)

Page 8 silex Getting Started
Part Number 40183-101
3. Connect the magnetic antenna base cable to the antenna cable.
4. Connect the antenna to the base.
5. Connect one serial null-modem cable from the Serial Port 2 DB-9 connector on the evaluation
daughtercard to a serial port on a personal computer or laptop. The PC or laptop acts as a console
port for command line configuration and monitoring.
6. If an Ethernet LAN connection is required, plug a category 5 Ethernet cable into the RJ-45 jack.
The Ethernet interface has Auto-MDIX that automatically detects and configures itself for either a
straight-thru or crossover Ethernet cable.
Figure 5 SX-550 Evaluation Daughtercard