Silex technology WLAN MODULE SX-550 - Manual (Page 63)

Console Commands silex Page 57
Part Number 40183-101
Command Description
SH NW AUTH Shows wireless authentication type
The default value is 11. Value is ignored in Infrastructure mode.
Sample output:
Authentication type= OPEN SYSTEM
SET NW CHannel Sets WLAN ad-hoc channel number
Sample output:
SET NW CHannel n
n = 1-11
SET NW ENC Sets WLAN Encryption Mode.
Supported modes are None, 64 bit WEP, 128 bit WEP, and TKIP (WPA).
The default value is Disable.
Sample output:
SET NW ENC [DIsable | 64 | 128 | TKIP ]
SH NW ENC Shows the wireless encryption mode
The deprecated command SH NW WEP also displays this information.
Sample output:
WiFi encryption is Disabled
SET NW KEY# Selects WLAN WEP key entry
The default value is 1.
Sample output:
SET NW KEY# n
n = 1-4
SET NW KEYVAL Sets the WLAN WEP key entry to the hex value
The default value is null.
Sample output:
SET NW KEYVAL <key>
key=10 or 26 hex characters
SET NW MOde Sets WLAN mode
The default value is Infra
Sample output:
SET NW MOde <mode>
[Infrastructure | Ad-Hoc]
SH NW MODE Shows wireless operating mode
Sample output:
Wifi mode = AD-HOC (802.11)