Silex technology WLAN MODULE SX-550 - Manual (Page 77)

Console Commands silex Page 71
Part Number 40183-101
Command Description
SET IP TImeout n
SET IP WIndow Sets TCP maximum window size in bytes
The default value is 10240.
Sample output:
SET IP WIndow nn
SH IP Shows TCP/IP related parameters
The default value is
Sample output:
IP is enabled
IP address 192.0.0.192 Boot tries 3
Subnet mask 0.0.0.0 Boot method AUTO
IP Gateway 0.0.0.0 Max window 10240
(set manually)
LPD banner disabled Timeout 1 min
LPD retries are disabled Keepalive 5 min
Service Port TCP port
xxxxxx_S1_A S1 9100
xxxxxx_S1_B S1 3001
Power Configuration Commands
Table 45 Power Configuration
Command Description
SET POWER LEVEL n Sets the power save mode. High power is for fastest throughput,
low power is for lowest power consumption.
Set POWER LEVEL 0, 1 or 2
0 = High Power
1 = Medium Power
2 = Low Power
Firmware Update
Table 46 Firmware Update
Command Description
SET LOAd
ENable Sets the firmware to perform a soft reset and enter the server boot program after the
next Exit command.