Silex technology WLAN MODULE SX-550 - Manual (Page 27)

Using the SX-550 WLAN Module silex Page 21
Part Number 40183-101
Generating Configuration Data
You can generate and view the configuration data using the pushbuttons on the module as described in
Table 13.
Table 13 Pushbutton Functions
Action Result
Depress for less than 5
seconds Generates configuration data output on Serial Port 1 of the module. It can
be viewed with a:
ƒ Terminal emulator, such as Windows HyperTerminal.
ƒ Serial device that displays ASCII characters
ƒ Test page if the module is connected to a serial printer
Depress for more than 5
seconds Resets the module’s configuration to factory defaults (cold reset).
The unit automatically re-initializes after updating the configuration
memory.
Depress for 3 seconds
during power up Places the device into console configuration mode, which can be used to
configure the device using the module’s serial port on Serial Port 2.