Silex technology WLAN MODULE SX-550 - Manual (Page 72)

Page 66 silex Console Commands
Part Number 40183-101
Command Description
Sample output:
SET SERVI <service name> FRM nn
SET SERVI <service
name> FRS Sets filter 1 text replacement replace string index.
If the index is zero, the default string of <CRLF> (carriage return-line feed) is
used.
The default value is 0.
Sample output:
SET SERVI <service name> FRS nn
SET SERVI <service
name> IP Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
The default value is enabled for service 1 and 2, disabled for all others.
Sample output:
SET SERVI <service name> IP [ENable | DIsable]
SET SERVI <service
name> NAme Changes service name
The default value varies by service
Sample output:
SET SERVI <service name> NAme <newname>
SET SERVI <service
name> POrt Sets output port associated with a service
The default value is S1.
Sample output:
SET SERVI <service name> POrt <portname>
SET SERVI <service
name> PRIority Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Sample output:
SET SERVI <service name> PRIority nn
SH SERVI PRI
[service_num] Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI <service
name> RECeive Sets receive only mode for a service
This option is required only for host applications that do not operate properly
if data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI <service name> RECeive [ENable |
DIsable]
SET SERVI <service
name> TCP Sets raw TCP port for service
If port number is 0, raw TCP is disabled on service.
The default value is 9100 for service 1, 3001 for service 2.
Sample output:
SET SERVI <service name> TCP nn
SH SERVI SUMmary Shows the basic parameters for a specific service. If service_num is not