Silex technology WLAN MODULE SX-550 - Manual (Page 50)

Page 44 silex Setting Configuration Parameters
Part Number 40183-101
Configuring Serial Port Monitor Alert and Trap Configuration
The SX-550 module can be configured to scan and compare the data received on the serial port to user-
defined strings. A match with a string can be a source for SNMP traps and/or email alerts.
The match strings and corresponding email or web page message strings are configured from the Internal
Configuration Console interface.
Table 28 describes the Monitor Alert and Trap Configuration Commands.
Table 28 Port Monitor Alert Commands
Command Description
SHOW PORT S1 TRIGMON Shows strings and index numbers being monitored
SET PORT S1 TRIGMON <trig #> <string> Assigns a string to be monitored on the serial port
Example:
Local> show port s1 trigmon
Index # Monitor String
------ --------------
Local> set port s1 trigmon 0 trigger on seeing this string
Local> show port s1 trigmon
Index # Monitor String
------ --------------
0: trigger on seeing this string