Silex technology WLAN MODULE SX-550 - Manual (Page 62)

silex Page 56
Part Number 40183-101
Appendix A:
Console Commands
The following tables describe the console commands available from the internal command console.
Access the command console through the serial port (J1), console port (JP1) or Ethernet port using a
Telnet session.
Wireless and Network Security Commands
The following group of commands configures network parameters.
Table 39 Network Commands
Command Description
SH NW Displays summary network information
Sample output:
WiFi Mode = INFRASTRUCTURE
WiFi SSID: silex
Speed = 11
Regulatory Domain = 704
WiFi FW Ver = 1F 1.7.1
AP density = LOW
TTLS is Disabled
WEP is Disabled
Link DOWN
SET NW
AUTHtype Sets wireless authentication type
The default value is Open System
Sample output:
SET NW AUTHtype [OPEN |SHARED | TTLS | LEAP | WPA-PSK]