Normal playback – Sanyo TLS-9024P User Manual

Page 26

Advertising
background image

NORMAL PLAYBACK

Normal Playback

1

Turn on the power to the VCR and TV monitor.

2

Load the video cassette tape.

3

Press the REC/PLAY SPEED

l

(or

j

) button to

select the playback speed mode.

ø

The selected playback speed mode is
displayed on the digital display.

NOTE:

œ

A slow motion effect or accelerated playback
effect can be achieved by using a slower or
faster playback speed than the speed used for
recording.

4

Press the PLAY button.

ø

Playback starts.

ø

If necessary, adjust the tracking to eliminate
the noise from the picture.

ø

If the image is unstable (rolling vertically),
adjust the vertical lock control to correct.

5

To stop playback, press the STOP button.

ø

To advance or rewind the tape, turn the
SHUTTLE

ring clockwise or counterclockwise.

NOTES:

œ

If a tape recorded in SP mode on a standard VCR is
loaded, playback will be done in 3-hour mode.

œ

A tape recorded on a time lapse VCR produced by
another manufacturer may not play back with the
same degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

1

While looking at the playback picture, press and
hold the TRACKING/V. STILL+ button to minimize
the noise.

2

If it cannot be minimized, press the TRACKING/V.
STILL
– button.

Vertical Lock Control

During still image mode,

1

Press and hold the TRACKING/V. STILL+ button to
reduce the vertical rolling of the image.

2

If it cannot be corrected, press the TRACKING/V.
STILL
– button.

Sharpness Control

Turn the SHARPNESS control clockwise or
counterclockwise for the desired sharpness of the
image.

Audio Playback

œ

Audio playback is only possible in 3-hour, 12-hour
and 24-hour modes.

œ

The playback speed has to be the same as the
recording speed, for normal playback of the audio.

œ

For a tape recorded in 12-hour and 24-hour recording
modes, to playback the audio, press the
SEARCH/AUDIO ON button after pressing the PLAY
button. “

?

” will be displayed to the left of the

playback speed on the digital display.

NOTE:

œ

Noise will appear in the image when audio playback
is used in 12- or 24-hour modes.

RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000

English

25

Advertising