Sanyo TLS-9024P - Manual (Page 30)

SETTING THE BUZZER
A buzzer can be set to sound during alarm recording, if
during recording the tape reaches the end, if buttons
are pressed or if there is a mechanical failure that
causes the tape to stop or be ejected, etc.
1
Press the MENU button until the (SET UP 2) menu
is displayed.
@@@@@@@<SET@UP@2>
öDISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
öBUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
2
Turn the JOG dial, until the desired item for which
the buzzer function will be set is flashing.
3
Turn the SHUTTLE ring to set “Y” for the functions
described below.
ALARM IN . . . The buzzer will be heard during
alarm recording.
TAPE END . . The buzzer will be heard when
the end of the tape is reached
during recording. To stop the
buzzer, press the STOP, EJECT
or PLAY button, or turn the
SHUTTLE ring.
KEY IN . . . . . The buzzer will be heard when
one of the VCR buttons is
pressed or when the JOG dial or
the SHUTTLE ring is turned.
WARNING . . The buzzer will be heard if the
heads are dirty and recording
qualtiy deteriorate, or if the tape
stops or is ejected due to a
problem with the internal
mechanism. To stop the buzzer,
press the STOP button.
4
Press the SEARCH/AUDIO ON button to save the
setting.
NOTES:
œ If “N” is set, the buzzer will not be heard.
œ During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not
be heard when a button related to one of these
modes is pressed, even if “Y” is set for the “KEY IN”
item.
RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000
English
29