SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 105)

Appendix B: Software Installation
B-3
Using the Array Configuration Utility (ACU)
The Array Configuration Utility (ACU) enables you to create, manage, and
delete arrays from the controller’s BIOS, add and delete spare drives,
and initialize drives. During the system startup, press the Ctrl and A keys
simultaneously, and the main menu will appear.
Using the Adaptec RAID Configuration Utility (ARC)
The Adaptec RAID Configuration Utility is an embedded BIOS Utility, in-
cluding:
*Array Configuration Utility: Use this utility when you want to create,
configure and manage arrays.
*Disk Utilities: Use this option to format or verify disks.
To run the Adaptec RAID Configuration Utility, you will need to enable the
RAID function in the system BIOS (refer to Chapter 7 for System BIOS
Configurations), and then press the Ctrl and A keys simultaneously
when prompted to do so during the system startup. (Refer to the previ-
ous page for detailed instructions.)
Note: To select an option, use the arrow keys to highlight the item and
then press the Enter key to select it. To return to the previous menu,
press the ESC key.