SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 64)

6-4
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
Figure 6-2. Removing the Fan Housing
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SCSI Drives: Because of their hotswap capability, you do not need to ac-
cess the inside of the chassis or power down the system to install or
replace SCSI drives. Proceed to the next step for instructions.
DVD-ROM/Floppy Disk Drives: For installing/removing a DVD-ROM or floppy
disk drive, you will need to gain access to the inside of the system by
removing the top cover of the chassis. Proceed to the "DVD-ROM and
Floppy Drive Installation" section later in this chapter for instructions.
Note: Only "slim" DVD-ROM and floppy drives will fit into the 6014P-8/
6014P-8R/6014P-82R/6014P-82.