SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 40)

5-6
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
Figure 5-3. JF1 Header Pins
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See
Figure 5-3 for the pin locations of the various front control panel buttons
and LED indicators. Please note that even and odd numbered pins are on
opposite sides of each header.
All JF1 wires have been bundled into single ribbon cable to simplify their
connection. Make sure the red wire plugs into pin 1 as marked on the
board. The other end connects to the Control Panel printed circuit board,
located just behind the system status LEDs in the chassis.
See the Connector Definitions section in this chapter for details and pin
descriptions of JF1.
Power Button
OH/Fan Fail LED
1
NIC1 LED
Front_UID
2
PWR/PW R Fail LED+
HDD LED
X
Reset
Pwr
Vcc
Vcc
Vcc
Ground
19 20
X
Ground NMI
X
NIC2 LED Vcc
UID_LED
PW R/PWR Fail LED-
X