SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 86)

7-12
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Hyper-threading
This setting allows you to E n a b l e o r D i s a b l e t h e h y p e r - t h r e a d i n g
f u n c t i o n . E n a b l i n g h y p e r - t h r e a d i n g r e s u l t s i n i n c r e a s e d C P U
performance. (Applicable for XP systems.)
Machine Checking
Enable to allow the operating system to debug a system crash after a
reset. The options are Disabled and Enabled.
DRAM Data Integrity Mode
If enabled, this feature allows the data stored in the DRMA memory to
be integrated for faster data processing. The options are 72-bit ECC,
144-bit ECC, Auto and Disabled.
ECC Error Type
This setting lets you select which type of interrupt to be activated as a
result of an ECC error. The options are None, NMI (Non-Maskable
Interrupt), SMI (System Management Interrupt) and SCI (System Control
Interrupt.)
SERR Signal Condition
This setting specifies the ECC Error conditions that an SERR# is to be
asserted. The options are None, Single Bit, Multiple Bit and Both.
USB Device
This setting allows you to Enable or Disable all functions for the USB
devices specified.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled.