SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 66)

6-6
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
2. Installing/removing hot-swap SCSI drive carrier
The SCSI drive bays are located in the front of the chassis, making them
easily accessible for installation and removal. The SCSI drives are hot-
swap units, meaning that they can be installed and removed while the sys-
tem is running. To remove a SCSI drive, first push the colored release
button located beside the drive's LEDs (1) , then swing the handle fully out
(2a) and use it to pull the SCSI drive carrier straight out (2b) (Figure 6-4).
Figure 6-4. Removing a SCSI Drive Carrier
!
Important: All of the SCSI drive carriers must remain in
the drive bays to maintain proper airflow.
2a 2a
2b 2b