SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 48)

5-14
S UPER S ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
5-8 Connector Definitions
ATX Power Connector
The X6DHP-8G/X6DHP-8G2 in-
cludes a 24-pin main power sup-
ply connector (JPW1) that meets
the SSI (Superset ATX) specifica-
tion. You can only use a 24-pin
p o w e r s u p p l y c a b l e o n t h e
motherboard. Make sure that the
orientation of the connector is cor-
rect. See the table on the right
for pin definitions.
Processor Power
Connector
In addition to the ATX power con-
nector, the 12v 8-pin processor
power connector at JPW2 must
also be connected to your power
supply for CPU power consump-
tion to avoid causing instability to
the system. See the table on the
right for pin definitions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
Processor Power
Connector
Pin Definitions
(JPW2)
Required
Connection
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
Pin
Number
19
20
Definition
Control
Ground
NMI Button
Pin Definitions (JF1)
ATX Power Supply 24-pin Connector
Pin Definitions(JPW1)
Pin Number Definition
13
+3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9
5VSB
10 +12V
11 +12V
12 +3.3V