SUPER MICRO Computer SUPERSERVER 6014P-8R - Manual (Page 45)

Chapter 5: Advanced Serverboard Setup
5-11
X6DHP-8G Quick Reference
Jumper Description Default Setting
JP17/JP18 DOC1/2 IDE Bus Select Closed (Master)
JPA1 SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2 SCSI Channel A Termination Enable Off (Enabled)
JPA3 SCSI Channel B Termination Enable Off (Enabled)
JBT1 CMOS Clear See Section 5-9
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
XJ4F1/XJ4F2* Memory Speed Select Closed (DDR333)
Connector Description
COM1/COM COM1/COM2 Serial Port Headers
DA1/DA2 SCSI CH A/SCSI CH B Activity LED
FAN 1-10 CPU/Chassis/Overheat Fan Headers
GLAN 1/2 G-bit Ethernet Ports
IPMI IPMI Connector
J22 System Management Bus Connector
J24 System Management Bus Power Connector
JA1/JA2 SCSI CH A/SCSI CH B Connectors
JD1 PWR LED (pins1-3)/Speaker Header (pins 4-7)
JF1 Front Control Panel Connector
JFDD1 Floppy Disk Drive Connector
JFW1/JFW2 DOC Power Connectors (JFW1:IDE1, JFW2:IDE2)
JIDE1/2 IDE#1/IDE#2 Hard Disk Drive Connectors
JL1 Chassis Intrusion Header
JPW1 Primary 24-Pin ATX PWR Connector
JPW2 12V 8-Pin CPU PWR Connector
Keyboard PS2 Keyboard Port
Mouse PS2 Mouse Port
SATA 0/1 Serial ATA1/2 Ports
UID Unit Identifier Button/LED
USB0/1 Universal Serial Bus Ports
USB2/3 Front Panel Universal Serial Bus Headers
V G A Video Connector
WOL Wake-on-Line Header
WOR Wake-on-Ring Header
Note:
Jumpers not noted are for test purposes only.