Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 28)

Disabling the USB receptacle on the side
terminal panel
You can connect a USB drive or other USB device to the USB receptacle on the side terminal panel
of your interactive flat panel, and then access the device from computer 1. For more information, see
Using the USB receptacle on page 46.
You can also disable this USB receptacle so that it doesn’t access any of the computers connected
to your interactive flat panel.
C A U T I O N
Disconnect the power supply for your interactive flat panel before you disable the USB receptacle.
g To disable the USB receptacle
1. Locate the rectangular cut-out on the back of your interactive flat panel.
2. Remove the screw securing the cut-out with a Phillips screwdriver. Retain the screw and cut-
out.
3. Locate the black jumper on the circuit board inside the panel.
C H A P T E R 3
Connecting computers and peripheral devices
20