Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 72)

Symptom Causes Solution
You connected two video
cables together.
1. Replace your two cables with one longer
cable.
OR
Move your computer so that it’s within a
single cable length of your interactive flat
panel.
2. Press the AUTO SET UP button on your
remote to reset your interactive flat panel.
OR
Press MENU on the menu control panel and
then select ADJUST > AUTO SETUP in
the on-screen display menu using the
buttons on the menu control panel. (For
more information, see page 75)
The image isn’t
centered on the
screen.
Press the AUTO SET UP button on the remote
control.
OR
Press MENU on the menu control panel and then
select ADJUST > AUTO SETUP in the on-
screen display menu using the buttons on the
menu control panel. (For more information, see
page 75)
The image is
unstable or
unfocused.
The video connection is
loose.
Secure the video cable to both your computer and
your interactive flat panel.
You have a poor quality
video cable
1. Replace your video cable with a better
quality video cable.
2. Press the AUTO SET UP button on the
remote control to reset your interactive flat
panel.
OR
Select MENU > ADJUST > AUTO
ADJUST on the menu control panel. (For
more information, see page 75.)
C H A P T E R 8
Troubleshooting for your interactive flat panel
64