Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 67)

g To remove the interactive flat panel
1. Turn off your interactive flat panel and unplug the power cable from the wall outlet.
2. Remove all accessible cables and connectors.
W A R N I N G
o Do not move the interactive flat panel by connecting a rope or wire to the handles on
the back. The interactive flat panel can fall and cause personal injury and product
damage.
3. There are two lifting handles on the back of the interactive flat panel, one on each side. With
one person on each end, use one hand each on the handle to support the weight of the
interactive flat panel and the other hand on the upper side to balance it during lifting. The
interactive flat panel weighs about 98 lb. (44.5 kg).
4. Lift your interactive flat panel from its mounting location.
C A U T I O N
o Do not allow the weight of the interactive flat panel to rest on the color select module
because it is not designed to support product weight.
o Do not leave the interactive flat panel face up, face down or upside down for an
extended period of time as it could cause permanent damage to the screen.
C H A P T E R 7
Maintaining your interactive flat panel
59