Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 40)

Infrared remote control buttons
The remote control enables you to access on-screen menus and change
display and input settings.
Use the remote control’s POWER ON button turn on your interactive flat
panel and the STANDBY button to turn it off.
Use the remote control’s input buttons to change input sources when
switching between the connected computers.
Number Function Description
1 POWER ON
STANDBY
Turns on your interactive flat panel
Turns off your interactive flat panel
2 ASPECT Selects picture aspect
3 STILL Turns on or turns off the still picture mode
4 Number pad Press buttons on the number pad to set and change passwords,
change channels or to customize or change settings
5 DISPLAY Turns on and turns off the on-screen display menu
6 SET Makes selection
7 Left/Right Increases or decreases the adjustment level within the
on-screen display menu
8 AUTO SET UP Enters auto setup menu
9 VOL +/- Increases or decreases audio output level
C H A P T E R 5
Using your interactive flat panel
32