Connecting computer 2 – Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP User Manual
Page 58
Connecting computer 2
You can connect a second laptop to the installed USB cable and video cable that is connected to the
back terminal panel of your interactive flat panel. If those cables aren't installed, connect the laptop to
the side terminal panel (see Connecting a guest laptop on page 47). For a diagram of the various
computer options, see Connecting computers to your interactive flat panel on page 16.
I M P O R T A N T
The laptop must have SMART Product Drivers installed. If it doesn’t, you need to connect the
laptop to the interactive flat panel using a SMART GoWire cable. If you purchased an
SBID8055i-SMP or SBID8055ie-SMP model, you can use the supplied SMART GoWire cable to
connect your laptop to the interactive flat panel. For more information, see Using a SMART GoWire
g
To connect computer 2
1. Place the laptop beside the ends of the cables at the computer 2 connection.
2. Connect the installed USB cable to a USB receptacle on the laptop.
3. Connect the VGA cable connector to the laptop.
4. Turn on the computer.
5. Press the VGA 2 button on the remote control.
OR
Press the Input button
on the front control panel until the input source is VGA 2.
g
To return to using computer 1
Press the VGA 1 button on the remote control.
OR
Press the Input button
on the front control panel until the input source is VGA 1.
C H A P T E R 6
Using guest laptops with your interactive flat panel
50