Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 83)

Appendix A: Adjusting video settings with the
on-screen display menu
Changing settings in the OSD menu 75
Main menu settings 76
Picture settings 76
Adjustment settings 77
Audio settings 77
OSD settings 77
Setup settings 78
Proximity control settings 79
You can access the on-screen display (OSD) menu using either the remote control (see Infrared
remote control buttons on page 32) or the menu control panel on the left side of the interactive flat
panel (see Left side view on page 6).
Changing settings in the OSD menu
N O T E
You can adjust many of the interactive flat panel screen settings using the remote control.
g To change settings in the OSD menu
1. Press the MENU button on the menu control panel or the remote control.
The on-screen menu appears.
2. Press the up and down arrows to select a menu.
3. Press SET.
4. Press the up and down arrows to select the setting you want to change.
5. Press SET.
Appendix A
75