Standard Horizon CPV350 - Manual (Page 103)

Page 103 CPV350
19.5 CALL WAITING DIRECTORY
The CPV350 logs received distress calls and individual calls. The DSC Call Waiting feature
is similar to an answer machine where calls are this recorded logs for review. When a call
is logged while the radio is set on the DSC Standby function, a message will appear on the
LCD. The CPV350 can be memorized up to the latest 23 Distress and up to the latest 56
Individual Calls.
19.5.0 Enabling the Call Waiting Feature
Follow the steps below to enable or disable the Call Waiting feature.
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight RADIO SETUP and
press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DSC SETTINGS and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight INDIVIDUAL REPLY MESSAGE and press
[ENT] or move the ShuttlePoint knob to the right.
4. A popup window will be shown with Able to Comply or Unable to Comply, move the
ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint
knob to the right.
5. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
Figure 19.5.0 - INDIVIDUAL REPLY MESSAGE menu
19.5.1 Reviewing Received Calls Logged into the Call Waiting
Directory
1. Press [CALL]. The “DSC Operation” menu soft keys will appear at the bottom edge of
the display.
2. Press [NEXT] to show additional soft keys.
3. Press [DSC LOG] to appear “DSC LOG” popup window on the display.
4. Move the ShuttlePoint knob to the up or down or turn the Channel Knob to
select the category ( DISTRESS or DSC CALL) you want to review and call
back.