Standard Horizon CPV350 - Manual (Page 113)

Page 113 CPV350
20. RADIO SETUP
20.0 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default name.
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight RADIO SETUP and
press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight VHF SETTING and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight COMMON CHANNEL SETUP and press [ENT]
or move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select the channel group (USA, INTL, or CAN) you wish
to change the channel name and press [ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob to highlight CH NO. and press [ENT] or move the
ShuttlePoint knob to the right.
6. Move the ShuttlePoint knob to select the operating channel you wish change the
channel name and press [ENT].
7. Move the ShuttlePoint knob to highlight NAME and press [ENT] or move the ShuttlePoint
knob to the right.
8. Move the ShuttlePoint knob to up or down to scroll through the first character (letter,
number, or symbol) of the channel name.
9. Move the ShuttlePoint knob to the right to enter the first character and step to the next
character to the right.
10. 7. Repeat step 8 and 9 until the name is complete. The name can consist of up to twelve
characters.
11. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
Figure 20.0 - CH EDIT menu