Standard Horizon CPV350 - Manual (Page 114)

Page 114 CPV350
20.1 UNIT NAME
This selection allows you to provide the name to the radio and optional RAM+ or VH-310
Handset when connected.
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight RADIO SETUP and
press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight VHF SETTING and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight UNIT NAME and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select the Unit (MAIN, RAM1, or RAM2) to be named and
press [ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob to up or down to scroll through the first letter of the unit
name.
6. Move the ShuttlePoint knob to the right to enter the first character and step to the next
letter to the right.
7. Repeat step 5 and 6 until the name is complete. The name can consist of up to twelve
characters.
8. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
Figure 20.1 - UNIT NAME menu