Standard Horizon CPV350 - Manual (Page 104)

Page 104 CPV350
5. Press [ENT], to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to review
and call back, then press [RESEND] to call the selected station.
Figure 19.5.1 - DSC CALL LOG list
19.5.2 To Delete the Received Log from the “DSC Log” Directory
1. Press [CALL]. The “DSC Operation” menu Tabs will appear at the bottom edge of the
display.
2. Press [NEXT] to change the menu Tabs to another Tabs.
3. Press [DSC LOG] to appear “DSC LOG” popup window on the display.
4. Move the ShuttlePoint knob to the up or down or turn the Channel knob to select the
category ( DISTRESS or DSC CALL) to be deleted.
5. Press [ENT], to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to delete,
then press [DELETE] to delete from the DSC Log.
7. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.