Standard Horizon CPV350 - Manual (Page 65)

Page 65 CPV350
13.0.9 Customizing the Data Windows
The data fields contained on the General, 1 Line Small/Large and 2 Line Small data windows
can be changed. The picture below shows the Chart page with 1 Line Large selected and
a popup window with many selections.
1. To change a data window field, press and hold [MENU] until the field is highlighted.
2. Move the ShuttlePoint knob to the desired data field and press [ENT]. The popup
window will be shown.
3. Move the ShuttlePoint knob up or down to choose the desired setting and press [ENT]
to select and press [CLR] to store and exit the editing mode.
Figure 13.0.9 - Customize the Data Windows
NOTE
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.
13.1 CUSTOMIZING CHART SETTINGS
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight MAP CONFIGURA-
TIONS and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob up or down to select the desired item within the groups
Marine Settings, Depth Settings, Land Settings, Chart Settings or Underwater Objects
Settings and press [ENT]. See the above sections for details on selections.