Standard Horizon CPV350 - Manual (Page 66)

Page 66 CPV350
13.2 NAVIGATION PAGE
This page is useful to show information when heading to a destination. The default page is
shown with a Compass Rose, however this can be customized to show a Compass Tape.
1. To change to show the COMPASS TAPE, select the Chart page, press [MENU] two
times. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or
move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight NAVIGATION PAGE and press [ENT] or move
the ShuttlePoint knob to the right.
4. Move the ShuttlePoint up or down to select COMPASS TAPE and press [ENT].
5. Press [CLR] or move the Shuttlpoint knob to the right until the Chart page is shown.
4
2
1
6
7
3
5
3
2
4
9
8
Fix position
Time
Speed Over Ground
Course Over Ground
5
1 Date
Distance
6
7
Bearing to Destination
8
9
VHF information
Compass Rose
Figure 13.2 - Navigation Data page with Compass Rose
4
2
1
6
7
3
5 3
2
4
9
5
1
8
9
Time To Go
Fix position
7
Compass Tape
Time
6
8
Speed Over Ground
Course Over Ground
Bearing to Destination
Distance to Destination
VHF Information
Figure 13.2a - Navigation Data page with Compass Tape