Standard Horizon CPV350 - Manual (Page 18)

Page 18 CPV350
Remote Mic or External Speaker Selection
By default the RAM+ or VH-310 Handset internal speaker is turned on, however using the
RAM+ mic (or VH-310 Handset) this speaker can be turned off so the external speaker can
be used.
RAM+ mic procedure
1. Press and hold the [CALL/SET] key.
2. Press the [
] or [ ] key to select RADIO SETUP.
3. Press the [CALL/SET] key.
4. Press the [
] key to until EXT SPK is shown and press the [CALL/SET]
key.
5. Press the [ ] or [ ] key to select oF (External speaker off) or on
(External speaker on).
6. Press the [CALL/SET] key to save the selection.
7. Press the [16/9] key to exit this mode.
VH-310 Procedure
1. Press and hold the [CALL(MENU)] key.
2. Press the [
] or [ ] key to select RADIO SETUP.
3. Press the [ENT] key
4. Press the [
] key to until EXT SPK is shown and press the [ENT] key.
5. Press the [ ] or [ ] key to select oF (External speaker off) or on
(External speaker on).
6. Press the [ENT] key to save the selection.
7. Press the [16/9] key to exit this mode.