Standard Horizon CPV350 - Manual (Page 49)

Page 49 CPV350
8.5 GOTO MARK
1. Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor)
on the Chart page.
2. Press [GOTO] to show the GOTO popup window.
3. Move the ShuttlePoint knob to highlight MARK and press [ENT] to show the Marks/Wpt
List.
4. Move the ShuttlePoint to the highlight the desired Mark or Waypoint and press [GOTO].
5. You will notice a circle is drawn around the Icon Symbol. This means the GPS
chartplotter is now navigating to the point.
6. Press [CLR] to switch to the Chart page or Highway page to start navigating to the point.