Determining the right trigger point – Kodak HR 500 User Manual
Page 102
Using the Long Roll Accessory
D-36
August 2001
Determining the Right Trigger Point
1. On the Film Controls window, click Position > to advance the film and
determine the “average” low number on the right LED.
2. Subtract the average low number from the highest number you recorded in
step 1 under Recording the Highest Numbers on the LEDs.
3. Divide the result of step 2 by 4.
4. Add the result of step 3 to the average low number determined in
step 1.
The result is the right trigger point. Record this number.
Below are examples of determining trigger points. Round to the nearest whole
number.
Average Low
Number
Starting High
Number
Difference
Between High
Number and Low
Number
Difference
Divided by 4
Trigger
Number
120
800
800 - 120 = 680
680/4 = 170
170 + 120 = 290
98
814
814 - 98 = 716
716/4 = 179
179 + 98 = 277