2 connecting and operating the scanner, Preparing the host computer, Connecting and operating the scanner -1 – Kodak HR 500 User Manual
Page 19: Preparing the host computer -1, Connecting and operating the scanner
Advertising
August 2001
2-1
2
Connecting and Operating the Scanner
This chapter gives instructions for:
•
preparing the host computer
•
connecting the Kodak Professional HR 500 Film Scanner to the host
computer
•
starting up the scanner system
•
preparing to scan an image
•
performing a scan
•
shutting down the scanner
Preparing the Host Computer
CAUTION: Do not connect power to the scanner.
1. Install the Ultra-Wide SCSI board into the host computer.
IMPORTANT: Check the README file for your operating system before you
install the software.
2. Install the SAM software. See Installing the Service and Assembly Module
Advertising