Kodak HR 500 - Manual (Page 87)

Using the Long Roll Accessory
August 2001 D-21
Installing the Adjustment Tool
1. Locate the left and right adjusting screws on either side of the aperture plate.
2. Install the height adjustment tool in the right or left adjusting screw.
NOTE: You will install the adjusting tool in each adjusting screw; whether it is
the left or right screw is determined by which punch reader you adjust
first.
P192_1554BC
adjusting screw
film reader
P192_1554BCA
P192_1544BC
120/220
adjusting screw
adjusting screw
P192_1544BCA
height adjustment tool
punch reader