Kodak HR 500 - Manual (Page 59)

Using the Service and Assembly Module (SAM)
August 2001 A-9
Setting the Scan Area
To set the Scan Area, enter values for:
• # Pixels (valid values range from 1 through 6002); for fastest scanning, enter
a value of 1000
• Pixel Offset (valid values range from 0 through 6001)
• # Lines (valid values range from 1 through 7464)
• Line Offset (valid values range from 0 through 7463)
• Pixel Summing (valid values are 1:1, 1:2, and 1:4)
NOTE: If you select Pixel Summing of 1:2 or 1:4, use the Actual #Pixels and
Actual #Lines for viewing the image in the Adobe Photoshop program.
Scanning the Image Data
1. If desired, save the scanned image as a file:
a. Enter the Path information (file destination).
b. Select Write image to file.
2. Click Scan.