Kodak HR 500 - Manual (Page 33)

August 2001 3-1
3
Validating the Scanner
This chapter includes instructions for using the Service and Assembly Module
(SAM) and Adobe Photoshop software to validate that the scanner functions
properly.
NOTES: For more information about using the Service and Assembly module
software on the host computer, see Appendix A.
Before scanning for the first time, set up a folder (on your host
computer) for your work. Especially if you have more than one scanner,
include the scanner serial number (on the dataplate on the back of the
scanner) in the folder name.
IMPORTANT: The empty 70MM-CAL film holder must be in position in the scanner
before you start SAM. See Placing the Empty Film Holder in the Film
Holder Guide on page 2-6.
Starting the SAM Software
1. Open SAM. The Operations window appears with the Mag/Focus tab
displayed.