Kodak HR 500 - Manual (Page 5)

August 2001 v
Regulatory Information
This equipment has been tested and found to comply with the limits for a Class A
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference; in
which case, the user would be required to incur the expense of correcting the
interference.
Cautionary Symbols
Hot Surface Symbol
CAUTION: Risk of burn. Wait at least 5 minutes for surface to cool.
Fuse Label
CAUTION: The Kodak Professional HR 500 Film Scanner uses double pole/
neutral fusing.
!
CAUTION: Double pole / neutral fusing.
ATTENTION: Double pôle / fusible sur le neutre.
ACHTUNG: Zweipolige bzw. Neutralleiter - Sicherung!
(2) 100-120 V 50/60 Hz 6.3 A / 250 V / F
(2) 200-240 V 50/60 Hz 3.15 A / 250 V / T