Setting the punch reader height – Kodak HR 500 User Manual
Page 85
Advertising
Using the Long Roll Accessory
August 2001
D-19
4. After the film is threaded, pull the gate actuator forward to latch it against the
aperture plate. Move the locking arm to the left (locked position).
Setting the Punch Reader Height
1. Open SAM.
2. Click the LAMP button to turn the lamp off. When the lamp is off, it is easier to
work in the area of the punch reader.
LOCK
P192_1552GC
P192_1552GCA
gate actuator
locked position
arm in the
toggles to turn the lamp off and on
Advertising