Kentrox AI232 - Manual (Page 152)

AI232 Version 9.6x User’s Guide
Alias and Call Routing Configuration: Call Routing
7-6
5. To access menu 02+Simple alias translation , enter 2 . Menu 8.2 appears:
6. To select 04 SLC routing translation , enter 4 . Menu 8 reappears with the SLC
routing translation configuration items.
Important: Menu item 04 SLC routing translation is the only valid menu item for
AI232. Use SLC routing translations to route calls through cards that
support non-time division subchannel (TDS) connections.
7. (optional) If you are routing calls between two AI232 cards, enter 3, and the IP
address of the remote AI232.
8. For 04 Called address - , enter 4, and the the called (destination) address.
The called (destination) address defines the IP address to contact. Maximum
length is 14 characters. The actual IP address or an alias macro can be entered
here.
9. For 05 This alias is visible in the destination menu , enter 5 to toggle between Yes
and No .
This setting specifies if the alias will appear in the welcome screen.
10. (optional) For 08 Call data - , enter 8, and the call user data.
Call data is dependent on the type of SLC being used. It may be directly entered
as an alias macro.
>2
Menu 8.2
01 Simple alias translation
02 Multiplexed connection
03 Multiplexed only translation
04 SLC routing translation
21 Exit this menu with no changes
Enter item number and optional ",value" then push <CR> key
>