Kentrox AI232 - Manual (Page 60)

AI232 Version 9.6x User’s Guide
System Configuration: RADIUS Configuration
4-14
Shell/FTP Options
Description
This item sets the Shell/FTP option for RADIUS as one of the following:
z Enabled —Enables RADIUS login.
z Disabled —Disables RADIUS login.
z Local fallback —Enables RADIUS login, but resorts to local login if the RADIUS
login fails.

Note: RADIUS and TACACS+ cannot both be configured at the same time.
Attempting to do this generates an error.
Menu Item Type
Toggle
Configuration in the AI198 Menu System
To configure the shell/FTP RADIUS option:
1. Access Menu 4.2.14-2.2.
2. For 09*Shell/FTP Radius Option , enter 9 to select ENABLED , DISABLED , or LOCAL
FALLBACK . The default is DISABLED .
This example displays 09*Shell/FTP Radius Option set to LOCAL FALLBACK .
Configuration in the AI232 Local Menu System
To configure the shell/FTP RADIUS option:
1. Access the RAS Configuration Menu located under the System Menu.
2. For Shell RAS Option , select Disabled , RADIUS , RADIUS/Fallback . The default is
Disabled .
>9
Menu 4.2.14-2.2
01*Primary Server Status (Enabled, Disabled)--------------------------- ENABLED
02 Primary Server IP Address------------------------------------050.023.156.012
03 Primary Server Port (1..65535)-----------------------------------------00122
04 Primary Server Secret------------------------------- hilltop
05*Secondary Server Status (Enabled, Disabled)-------------------------DISABLED
06 Secondary Server IP Address----------------------------------000.000.000.000
07 Secondary Server Port (1..65535)---------------------------------------01812
08 Secondary Server Secret----------------------------- applied
09*Shell/FTP Radius Option (Enabled, Disabled, Local Fallback)---LOCAL FALLBACK