Kentrox AI232 - Manual (Page 186)

AI232 Version 9.6x User’s Guide
AI232 Commands: aaa retry
8-14
aaa retry
Description
This command configures the number of consecutive connection attempts that are
made to a TACACS+ server before the attempt fails.

Note: Consecutive attempts are only made if the TACACS+ server responds but
refuses a connection. If no response is received from a TACACS+ server
before the configured timeout period, then no further connection attempts are
made. For information on configuring the timeout period, refer to command
aaa timeout on page 8-19
Command Type
shell
Formats
aaa retry { retry_count | default }
Parameters
Command Defaults
1 connection attempt
Examples
This example displays the configuration of consecutive connection attempts to 5 .
retry_count Defines the number of consecutive connection attempts that are
made. Valid values are 1 to 100.
default Resets the number of connection attempts to the default value.
[232] aaa retry 5
[232]