Creset, Creset -29 – Kentrox AI232 User Manual
Page 201
AI232 Version 9.6x User’s Guide
AI232 Commands: creset
8-29
creset
Description
This command resets the error counters for a link or a range of links. There is no
output for this command. To see if the error counters were reset for the links you
specified, enter command
Command Types
shell and winslc
Formats
For the shell command:
creset
range
For the winslc command:
winslc
baseport
creset
range
Parameters
Examples
This example displays the resetting of error counters for links
5
to
7
.
range
Defines the link or a range of links being reset. Valid values are:
z
A single link number (for example,
3
to reset error counters for link
3)
z
A series of link numbers separated by commas (for example,
1,2,3
to reset error counters for links 1, 2, and 3)
z
A range of link numbers separated by a dash (for example,
1-2
to
reset error counters for links 1 and 2)
z
Any combination of a single link number, series, and/or range (for
example,
1,2-3
to reset error counters for links 1, 2, and 3)
z
*
to reset error counters for all links.
baseport
Defines the baseport number for AI232.
[232]creset 5-7
[232]