Kentrox AI232 - Manual (Page 265)

AI232 Version 9.6x User’s Guide
AI232 Commands: staslc
8-93
Examples
This example displays the link and cable status information for links 1 to 5 .

Note: Not all links are displayed here. Entering the command with no additional
parameters would show all 32 links.
[232]staslc 1-5
Link Status Appl. DTR RTS CTS DSR DCD Format Parity Frame Overun Underun
1: Idle Login + + - - - 9600,8,n,1 0 0 0 0
2: Disabled Login ? ? ? ? ? 9600,8,n,1 0 0 0 0
3: -MMUX ? ? ? ? ? 19200 0 0 0 0
4: Disabled Login ? ? ? ? ? 9600,8,n,1 0 0 0 0
5: Disabled Login ? ? ? ? ? 9600,8,n,1 0 0 0 0
DP232 Cable Status: Ports 1-8 Connected Ports 9-16 Not Connected
Ports 17-24 Not Connected Ports 25-32 Not Connected
[232]
Column Description
Link Displays the number of the link.
Status Displays the link status as dataxfer (data is being transfered),
idle , or disabled .
Appl. Displays the application specified for the link ( Alias , Login , or
Destination ).
DTR RTS CTS DSR DCD Displays the status of the control signals. ( + means the signal
is asserted and - means the signal is negated.)
Format Displays the baud rate, number of data bits, parity ( none , odd ,
or even ), and number of stop bits specified for the link.
Parity Displays the number of parity errors.
Frame Displays the number of framing errors.
Overun Displays the number of overrun errors.
Underun Displays the number of underrun errors.