Kentrox AI232 - Manual (Page 234)

AI232 Version 9.6x User’s Guide
AI232 Commands: ip init
8-62
ip init

Note: This command is only valid when AI232 is in standalone mode.
Description
This command configures the following settings for AI232 in standalone mode:
z IP address
z Subnet mask
z High IP address
z Primary gateway address
z Backup gateway address
z IP address range
CAUTION: The following message appears when the “ip init” command is invoked
and no login ports are configured:
There are no login ports currently configured for this system. Please take
necessary precautions to prevent lockout.
Command Type
shell
Formats
ip init
Examples
This example displays the prompt that appears when ip init is entered. A prompt
appears for each configurable IP address item.
[232] ip init
Enter IP Address (xxx.xxx.xxx.xxx):