Kentrox AI232 - Manual (Page 285)

AI232 Version 9.6x User’s Guide
AI232 Commands: tftpboot
8-113
This example displays the result of a card booting when no BOOTP or TFTP server is
on the net.
This example displays the result of a boot when the BOOTP server is on the net but
the TFTP server is not available:
This example displays the result of a reboot with a successful BOOTP/TFTP session:
[232] tftpboot
Usage: tftpboot [abort]
Displays BOOTP/TFTP status or aborts retry attempts.
Waiting for a response from the BOOTP server.
[232] tftpboot abort
BOOTP/TFTP retry attempts will be aborted.
[232]
[232] tftpboot
Usage: tftpboot [abort]
Displays BOOTP/TFTP status or aborts retry attempts.
Waiting for a response from the TFTP server.
BOOTP Response:
IP Address: 10.48.60.11
TFTP Server: 10.48.60.1
TFTP File: 296v950b002.cnf
Subnet Mask: 255.255.0.0
Router: 10.48.0.1
[232]
[232]tftpboot
Usage: tftpboot [abort]
Displays BOOTP/TFTP status or aborts retry attempts.
BOOTP/TFTP is finished.
[232]